The engraving machine dust cover is widely used in our daily life. Then, how do we protect and maintain the service life in the usual way? Let's look at it:
Engraving machine
1. The content of regular inspection is mainly the inspection of the dust cover of the engraving machine to avoid the adhesion of dust and abrasive particles to the outer surface of the screw. If these things exist, it will affect the service life of the screw and the accuracy of the work, forming the product. If it is unqualified, if the damage of the screw guard cover is found during the inspection process, it should be repaired in time, and it should be replaced in time when the damage is severe.
The above is about the use of the engraving machine dust cover to do good work, the development and implementation of these operations can fully exert the effect of the engraving machine protective cover, reduce the occurrence of problems, and can extend the life.
2, daily viewing
Excavation of all kinds of chips and other stolen goods in the excavation table, to avoid the accumulation of debris, to see if the running track reaches the smooth requirements, to avoid the damage caused by the huge conflict caused by the lack of smooth oil, to see if the appearance is very smooth, The presence or absence of scratches, as a basis for detection of early detection, these problems are best repeated before the afternoon of work, these tasks are the main points of the day, expectations to cause our attention.
