The rapid development of the era has promoted the rapid development of CNC carpenter engraving machines, and many professions are understanding and introducing such automated machinery and equipment for production. In particular, wooden doors, furniture manufacturing, etc., are the primary market for carpenter engraving machines. Fast and efficient processing, as well as in-depth engraving quality, are the most important points for customers.
As is well known, carpenter engraving machines are widely used, in addition to embossing, cutting, etc., and also have punching and other processing functions. The method of punching and embossing and cutting operation is completely different. The punching seems to be simple, and the processing method is more messy. Perhaps many people think that punching is much simpler than embossing. In fact, we know that the cutting data of carpenter engraving machine depends on the linear speed of the high-speed rotation of the tool. In the process of making the straight-line knife, the flat-blade cutting is the first step. . The line speed of the bottom edge is: V=D*N, (D—tool diameter, N—tool speed). The smaller the diameter D of the bottom edge is, the smaller the line speed is, the smaller the line speed is, and the cutting ability is weakened accordingly. In the center of the bottom edge, the diameter D value is 0, so the line speed is 0, and the cutting ability is the worst. It can be seen that the cutting edge of the flat bottom knife is worse than the side edge. Therefore, when drilling or reaming on the hard wood, the straight knife should be avoided as much as possible, and the spiral lower knife method is often used.
It can be seen that any seemingly simple processing technology has its fine side. The use of CNC carpenter engraving machine is a good example. Mastered the processing skills, not only the beauty of the workpiece processing, processing speed and processing costs can be greatly advanced. Therefore, when we use the CNC engraving machine, we must avoid low eyesight. In the ordinary operation process, we should pay more attention to some application and processing techniques.
